ARDEX A 826

Ultra-Fine Finishing Plaster

ARDEX A 826 is a brilliant white, rapid hardening, ultra-fine plaster for the smoothing and finishing of interior wall and ceiling surfaces. ARDEX A 826 creates a true feather finish for walls and ceilings.

  • Ideal for ultra-fine skim coats
  • One coat single application
  • Paint in as little as 1 hour
  • Sanding not required, can be sponge finished
  • Can also be used to fill joints between plasterboards on walls and ceilings
  • Shrinkage compensated, will not crack or craze
  • Brilliant White
  • Apply from feather edge to 10mm

 

ARDEX 826 Conforms to EN 13963: 2014 Jointing Material for Gypsum Boards and is A1 in accordance with EN 13501-1

 

 

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage