ARDEX MVS 95

One Component Residual Moisture Vapour Suppressant

ARDEX MVS 95 protects the final floorcovering from residual construction moisture, ensuring fast track flooring installations. ARDEX MVS 95 is ideal for use in new construction or refurbishment projects where a structural damp proof membrane is present and the relative humidity of the floor does not exceed 95% RH.

  • Fast drying - ARDEX Levelling and Smoothing Compounds can be applied in as little as 2 hours
  • Apply ARDEX Levelling and Smoothing Compounds direct without priming
  • Suitable for use on heated screeds
  • Ready for use, resealable and reusable
  • Water-based, low VOC technology

Unit Size Available: 12kg

Coverage: Refer to product datasheet

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage