ARDEX EP 2000

Solvent-free, low viscosity, two-component Epoxy Resin

ARDEX EP 2000 is a repair and filling system that seals cracks in cement/sand screeds and concrete. Once hardened, the resin is water, frost, weather and chemical resistant.

  • Fills and repairs cracks in screeds and concrete
  • Ready to receive loads and levelling and smoothing compounds after 24 hours
  • Resistant to water, frost, weather and chemicals
  • Easily mixed and can be poured directly into cracks, or applied with a roller to the surface

Unit Size Available: 6kg

Coverage: Refer to product datasheet

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage