ARDEX E 101

Tile Grout Improver

Tile Grout Improver

ARDEX E 101 is used in conjunction with ARDEX cement-based grouts or cement/sand grouting mortar to provide elastic and water repellent properties to the set and hardened grout.

  • For use with ARDEX F 4, C2 and GK cement-based tile grouts
  • For flexible and water repellent joints
  • Provides protection for moisture-sensitive backgrounds
  • For use when grouting tile joints on heated subfloors
  • Recommended when tiling to wood-based sheets and boards
  • Provides increased adhesion to dense tile edges

Unit Size Available: 1kg, 5kg

Coverage: Refer to product datasheet

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage