ARDITEX RS PLUS

Rapid Setting Levelling and Smoothing Compound

ARDITEX RS PLUS is suitable for use over traces of most old adhesive residues, and floorcoverings can be applied after only 6 hours.

  • Apply floorcoverings after 6 hours
  • Rapid setting – a 3mm application will take foot traffic typically after 2 hours
  • Excellent flow and application properties
  • Unaffected by moisture, can be used under an ARDEX DPM
  • Apply from 6mm to 12mm incorporating ARDEX Aggregate

Unit Size Available: 20kg Powder & 4.8kg Latex

Coverage: Approximately 5m2 at 3mm thick per unit

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage