ARDEX FEATHER FINISH

Rapid Drying Patching and Smoothing Compound

ARDEX FEATHER FINISH is ideal for patching and smoothing minor surface damage to levelling and smoothing compounds i.e. footprints and trowel marks.

  • Floorcoverings can be installed after as little as 15 minutes
  • True feather edge allows for greater coverage
  • Cost effective - up to 50m² coverage per 11kg bag
  • No priming required

Unit Size Available: 5kg, 11kg

Coverage: Approximately 50m2 at feather edge per 11kg unit

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage