ARDITEX NA

Ultra Rapid Setting Latex Sub-Floor Levelling and Smoothing Compound

By reducing the need for intensive preparation and priming, ARDITEX NA saves you both time and money. Renowned versatility, advanced site tolerance and a reduction in preparation machinery hire, lost time and call backs, all help to ensure that with ARDITEX NA, there really is no alternative.

  • Install floorcoverings after 4 hours, and ceramic tiles in as little as 3 hours
  • Can be used with confidence over old adhesive residues, including bitumen
  • Excellent adhesion without priming to almost all substrates, including flooring grade plywood, ARDEX Damp Proof Membranes and even direct to ceramic tiling
  • Unaffected by moisture, can be used under or over an ARDEX Damp Proof Membrane and direct to damp concrete

The Original Yellow Bag ®

Unit Size Available: 20kg Powder & 4.85kg Latex

Coverage: Approximately 5m2 at 3mm thick per unit

 

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage