ARDEX A 125

Fine Coat Smoothing & Finishing Render

ARDEX A 125 is a fine coat finishing render for walls and ceilings. It dries to a hard wearing, water and weather resistant finish, with a smooth, dense surface suitable for painting.

  • Ideal for skim coat wall and ceiling rendering - apply up to 5mm
  • Finishes to a smooth surface suitable for painting
  • Fast track - ready to receive decorative finishes the next day
  • Extended pot life of 4 hours
  • Provides a hard wearing surface
  • Water and weather resistant
  • Suitable for internal and external locations
  • Non-combustible – Class A1 in accordance with EN 13501-1

Unit Size Available: 22kg

Coverage: Approximately 5m2 at 3mm thick per 22kg unit

 

Download all documents

Tile adhesive
Notch size / bed thickness
Area to be covered

How much will I need?

The number of kg required = kg
The number of units required for your project = units.

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered
Select product
Depth mm
Area to be covered

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box.

Tile Dimensions Grout
Length (mm)
Breadth (mm)
(check joint width)
Joint Dimensions
Width (mm)
Depth (mm)

All tile and joint dimensions are rounded up to the nearest number (no decimal points).


Results - based on figures and product chosen above.
Result kg per square metre. Therefore:
a kg unit will cover -

How many unit(s) will I need?

Enter the area of your project here: m²   
The number of kg unit(s) required for your project =

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage